Free 1Z0-902 sample questions
Work through these free 1Z0-902 sample questions on Exadata X9M, each with the answer and an explanation. They cover OEDA planning, ASM disk groups and patchmgr updates. Use them to find the parts of an Exadata deployment you should review.
Try them in the simulator Same questions, with study, timed and flashcard modes.
Showing 10 of 20 free sample questions.
A storage administrator is tasked with replacing a failed hard disk in an Exadata X9M Storage Server. After replacing the physical drive, the new disk is not automatically added back to the ASM disk group. The administrator verifies the disk is physically sound and recognized by the cell. What is the most likely cause of this issue?
A retail company is planning the physical installation of a new Exadata X9M Full Rack. The data center manager needs to ensure the site meets the power requirements. Which of the following is a key safety and operational best practice for the power setup of an Exadata machine?
What is the primary function of the Remote Direct Memory Access (RDMA) protocol over Converged Ethernet (RoCE) within the Exadata X9M network fabric?
An implementation specialist needs to perform a zero-downtime software update on an entire Exadata X9M rack. The goal is to patch all database servers and storage servers in a rolling fashion. Which THREE actions are part of the recommended procedure using `patchmgr`? (Select THREE)
A new Exadata administrator is reviewing the monitoring setup. They discover that Automatic Service Request (ASR) is configured and want to understand the flow of information when a fault is detected. What is the correct sequence of events after a hardware component on a storage server reports a fault? sequenceDiagram participant SS as Storage Server participant ILOM as ILOM/SP participant ASRM as ASR Manager participant Oracle as Oracle Support SS->>ILOM: Reports hardware fault ILOM->>ASRM: Sends SNMP trap with fault data ASRM->>Oracle: Creates secure Service Request Oracle-->>ASRM: Acknowledges SR & assigns engineer
The command `dbmcli -e "ALTER DBSERVER cpuCoreCount=_____, memoryQuantity=256G"` is used to resize a virtual machine on an Exadata database node. Which option represents a valid value for the `cpuCoreCount` parameter?
True or False: In an Exadata X9M environment, enabling Flash Cache in Write-Back mode improves read performance but has no impact on write performance.
A system administrator needs to verify the firmware version of the physical hard disks and flash devices within a specific Exadata Storage Server. Which `cellcli` command provides this information?
An Exadata X9M machine is configured with high redundancy ASM disk groups, meaning there are three failure groups. A catastrophic failure causes an entire storage server, which constitutes one failure group, to go offline permanently. What is the state of the ASM disk groups immediately following this failure?
10 more free samples are waiting
Create a free account to unlock the whole 1Z0-902 sample bank, or get full access to all 429 practice questions in the simulator.