Free 1Y0-231 sample questions
Below are free 1Y0-231 sample questions, each with the answer and an explanation. They cover LDAP authentication, VPN sessions and SSL offload. Answer each one first, then read why the correct setting works.
Try them in the simulator Same questions, with study, timed and flashcard modes.
Showing 10 of 20 free sample questions.
Which Citrix ADC platform offers an out-of-the-box, hardware-independent, multi-tenant solution?
The Citrix ADC SDX architecture allows instances to share ___________ and ___________. (Choose the two correct options to complete the sentence.)
A Citrix Administrator wants to configure independent and isolated access on a single appliance to allow three different departments to manage and isolate their own applications. What can the administrator configure to isolate department-level administration?
If a user device does NOT comply with a company’s security requirements, which type of policy can a Citrix Administrator apply to a Citrix Gateway virtual server to limit access to Citrix Virtual Apps and Desktops resources?
Scenario: A Citrix Administrator deployed a Citrix ADC in one-arm mode. Currently, the VLANs 20, 30, and 40 are tagged on the interface with the option of ‘tagall’. What is true regarding the VLANs, when ‘tagall’ is enabled on the interface?
Scenario: A Citrix Administrator needs to create local, limited-privilege user accounts for other administrators. The other administrators will require only: • The ability to enable and disable services and servers • Read-only access Which built-in command policy permission level can the administrator use?
Scenario: A Citrix Administrator is managing a Citrix Gateway with a standard platform license and remote employees in the environment. The administrator wants to increase access by 3,000 users through the Citrix Gateway using VPN access. Which license should the administrator recommend purchasing?
In a single-hop deployment, a Citrix Administrator needs to use a client’s IP address as the source IP address for Citrix ADC-to-server connections. Which Citrix ADC mode can the administrator use to meet this requirement?
A Citrix ADC is configured in two-arm mode. A SNIP (192.168.10.20) on VLAN 10 is used to communicate with backend servers on the 192.168.10.0/24 network. The administrator has enabled Management Access on this SNIP. However, administrators on the management network (172.16.1.0/24) cannot access the ADC's management interface via the SNIP's IP address. A firewall between the networks allows all traffic. What is the most likely reason for this failure? graph TD subgraph Mgmt_Network ["Management Network (172.16.1.0/24)"] AdminPC[Admin PC] end subgraph Server_Network ["Server Network (192.168.10.0/24)"] Server1[Server 1] Server2[Server 2] end subgraph ADC NSIP[NSIP 10.0.0.5] SNIP[SNIP 192.168.10.20] end AdminPC -->|Attempt Mgmt| SNIP SNIP --x|No Route Back| AdminPC SNIP -->|Server Traffic| Server1
10 more free samples are waiting
Create a free account to unlock the whole 1Y0-231 sample bank, or get full access to all 540 practice questions in the simulator.