Free 200-201 sample questions
Here are free 200-201 sample questions for CCNA Cybersecurity, with an answer and an explanation for each. Expect the CIA triad, intrusion analysis and NIST incident handling. Use the explanations to see how a SOC analyst reasons through each case.
Showing 10 of 20 free sample questions.
At what layer of the OSI model Internet Protocol (IP) operate?
Correct answer: Layer 3
Explanation: Both IPv4 and IPv6 operate at the Network Layer 3 of the Open System Interconnection (OSI) model. The TCP/IP suite of protocols includes Address Resolution Protocol (ARP), Internet Protocol (IP), Internet Control Message (ICMP), Internet Group Management Protocol (IGMP), Transmission Control Protocol (TCP), and User Datagram Protocol (UDP).The TCP/IP suite operates at Layer 2, Layer 3, and Layer 4 of the OSI model follows:Layer 2, Data Link: ARPLayer 3, Network: IP, ICMP, IGMP, ARPLayer 4, Transport: TCP, UDPThe TCP/IP suite operates at layer 2, and layer 3 of the TCP/IP model as follows:Layer 1, Link: ARPLayer 2, Internet: IP, ICMP, IGMP, ARPLayer 3, Transport: TCP, UDPObjective: Network ConceptsSub-Objective: Describe the operation of the following: IP, TCP, UDP, ICMP -- Reference: http://www.ciscopress.com/articles/article.asp?p=1757634seqNum=2
Which of the following is a compilation of routine procedures and operations that the system administrator or operator carries out?
Correct answer: runbook
Explanation: A runbook is a compilation of routine procedures and operations that the system administrator or operator carries out. The runbook is typically divided into routine automated processes and routine manual processes. The effectiveness of a runbook can be measure by these metrics. Mean time between failures (MTBF) is an estimate of the amount of time a piece of equipment will last and is usually determined by the equipment vendor or third party. Mean time to repair by the equipment of the amount of time it will take to fix a piece of equipment and return it to production. The owner of the equipment usually determines this amount of time. An agenda comprises items to be covered in a meeting. A workflow describes the movement of a piece of work through a process from one operation to another. While a script may a part of runbook, not all runbook operations are automated. Some are manual. Objective: Security Concepts Sun-Objective: Describe these terms. Threat actor, Runbook automation (RBA), Chain of custody (evidentiary), Reverse engineering, Sliding window anomaly detection, PII, PHI.
Which of the following occurs at Layer 7 of the OSI model?
Correct answer: Deep packet inspection
Explanation: Deep packet inspection is performed by application firewalls, which operate at layer 7 (the Application layer) of the OSI model. This is the examination of the actual data portion of the IP packet. An application firewall is typically integrated into another type of firewall to filter traffic that is traveling at the Application layer of the Open Systems Interconnection (OSI) model. An embedded firewall is typically implemented as a component of a hardware device, such as a switch or a router. Stateful firewall operation occurs at Layer 3. This type of inspection monitors the TCP three-way handshake which occurs at Layer 3. Stateful firewalls, monitor the state of each TCP connection as well. When traffic is encountered, a stateful firewall first examines a packet to see if it is the result of a previous connection. Information about previous connections is maintained in the state table. With a stateful firewall, a packet is allowed if it is a response to a previous connection. If the state table holds no information about the packet, the packet is compared to the access control list (ACL). Depending on the ACL, the packet will be forwarded to the appropriate host or dropped completely. Packer filtering can be done based on IP addresses and port numbers. That means this type of filtering occurs at Layer 3 and 4.VLANs filter traffic by MAC addresses, and as such operate at Layer 2 of the OSI model. Objective: Network ConceptsSub-Objective: Compare and contrast deep packet inspection with packet filtering and stateful firewall operation. -- Reference: http://bloggerspath.com/what-is-deep-packet-inspection-and-its-advantages-and-disadvantages/
What occurs when you allow specific executable files while denying all others?
Correct answer: whitelisting
Explanation: When you whitelisting, you are creating a list of allowed applications while denying all others. Those approved applications are designated as whitelisted. These lists can also be used for domain name allowance with DNS. Several products are available that check for applications that are not on the whitelist, including attempts to install those applications. For example, the logs generated by the whitelisting product would tell you if someone had attempted to install a key logger. When blacklisting, you create a list of denied applications while allowing all others. These lists can also be used for domain name blocking with DNS. Blacklisting is an allow by default concept, where all software is allowed to execute unless it is on the Deny List. There is no form of filtering called redlisting or greylisting. Objective: Security Monitoring Sub-Objective: Describe these NextGen IPS event types: Connection event, Intrusion event, Host or endpoint event, Network discovery event, NetFlow event. -- Reference: https://www.schneier.com/blog/archives/2011/01/whitelisting_vs.html
Which operation has as its goal the identification of all available services on a device?
Correct answer: port scan
Explanation: A port scan identifies the open ports on a device, and thus the services available. A ping scan has as its goal identification of all live devices in the network. A smurf attack is an attack where a ping request is sent to a broadcast network address with the aim of overwhelming the system. Operating system (OS) fingerprinting has as its goal the identification of the operating system and version. Banner grabbing is a fingerprinting technique that relies on morphed or empty TCP packets that are sent over to a target machine. Telnet, Netcat, Nmap and other tools can be used to carry out banner grabbing. Banner grabbing also has as its goal the identification of the operating system and its version. Banner grabbing intercepts a text file sent by a server or a host. The text file includes OS information and in the case of a web server, perhaps the basic configuration info. The attacker can then exploit that information. Objective: Attack MethodsSub-Objective: Describe these endpoint-based attacks: Duffer overflows, Command and control (C2), Malware, Rootkit, Port scanning, Host Profiling -- Reference: https://www.lifewire.com/introduction-to-port-scanning-2486802
Which cross-site scripting attack is sometimes called persistent?
Correct answer: stored
Explanation: A stored XSS attack is one in which the injected script is stored in the server and received from the server by the user device. Cross-site scripting (XSS) poses the most danger when a user accesses a financial organization’s site using his or her login credentials. The problem is not that the hacker will take over the server. It is more likely that the hacker will take over the client’s session. This will allow the hacker to gain information about the legitimate user that is not publicly available. To prevent XSS, a programmer should validate input to remove hypertext. You can mitigate XSS by preventing the use of HTML tags or JavaScript image tags. A reflected or non-persistent attack is one that is reflected off the web server and not stored on the server. Directed is not a term used to describe cross site scripting attacks. Objective: Attack Methods Sub-Objective: Describe these web application attacks: SQL injection, Command injections, Cross-site scripting -- Reference: https://www.owasp.org/index.php/Cross-site_Scripting_(XSS)
Quantitative and qualitative are two types of which of the following?
Correct answer: risk analysis
Explanation: Risk analysis come in two basic types. When scoring is used to rate risks rather than dollar figures to potential outcomes. A business impact analysis (BIA) focuses on critical business systems and the impact if they are lost to an outage. A BIA is created to identify the company’s vital functions and prioritize them based on need. It identifies vulnerabilities and threats and calculates the associated risks. A disaster recovery plan is a short term plan that is implemented when a large disaster event occurs. The plan is created to ensure that your company can resume operations in a timelymanner. It mainly focuses on alternative procedures for processing transactions in the short term. it is carries out when the emergency occurs and immediately following the emergency. Heuristics is an approach that identifies malware based on the behavior it exhibits rather than a signature. A heuristics IDS uses artificial intelligence (AI) to detect intrusions. Analytics are performed on the actions taken, and the IDS takes action based on the logic in the AI.Objective: Security ConceptsSub-Objective: Describe these security terms: Principle of least privilege, Risk scoring/risk weighting, Risk reduction, Risk assessment. -- Reference: https://www.pmi.org/learning/library/qualitative-risk-assessment-cheaper-faster-3188
What is the primary function of routers?
Correct answer: To separate collision domains and broadcast domains
Explanation: Routers create both a broadcast domain for each interface. Routers move traffic from one network to another network, with each interface hosting an IP subnet. A router is a hardware device that transmits data among computers in different networks. Routers use IP addresses to make routing decisions. A switch is a device that separates collision domains only. Switches make switching decisions based on MAC addresses. A switch is a high-speed networking device that receives incoming data packets from one of its ports and directs them to a destination port for local area network access. A switch will redirect traffic bound outside the local area to a router for forwarding through an appropriate WAN interface. Neither routers nor switches create only a broadcast domain on each interface. Routers create both a broadcast domain and collision domain for each interface. A switch is a device that separates collision domain only. DNS servers, not routers, separate DNS domains. A Domain Name Service (DNS) server provides a centralized database of domain name-to-IP address resolutions on a server that other computers on a network can use for name resolution. Objective: Network Concepts Sub-Objective: Describe the basic operation of these network device types: Router, Switch, Hub, Bridge, Wireless access point (WAP), Wireless LAN controller (WLC) -- Reference: https://ciscoskills.net/2011/03/30/collision-domains-vs-broadcast-domains/
OpenDNS is a Cisco security solution designed to protect which component?
Correct answer: Cloud
Explanation: OpenDNS is a company and service that hosts a cloud computing security product suite, Umbrella. OpenDNS’s business services were renamed as Cisco Umbrella; home productsretained the OpenDNS name. It also offers DNS resolution as an alternative to using Internet service providers’ DNS servers or locally installed DNS servers. Other services offered for cloud protection by Cisco include Cloud lock. While other products exist for LAN, WAN and DMZ, the Umbrella feature is not one of them. A local area network (LAN) covers a small geographic area. Typically, a LAN is confined to a campus, a single building, a floor of a building, or an area with in building. A wide area network (WAN) uses routers (or a collection of routers) to connect LANs that are dispersed over a large geographic area. An example would be a company with office locations in Boston, Miami, Chicago, Dallas, Denver, and San Francisco. Each office has its own LAN, and routers are used to provide connections between the offices. By building the WAN, the offices can share resources and data. Objective: Network ConceptsSub-Objective: Describe the functions of these network security systems as deployed on the host, network, or the cloud: Firewall, Cisco Intrusion Prevention System (IPS), Cisco Advanced Malware Protection (AMP), Web Security Appliance (WSA) / Cisco Cloud Web Security (CWS, Email Security Appliance (ESA) / Cisco Cloud Email Security (CES). -- Reference: https://www.opendns.com/
10 more free samples are waiting
Create a free account to unlock the whole 200-201 sample bank, or get full access to all 740 practice questions in the simulator.