ExamDumpster

Free 4A0-D01 sample questions

Practise SR Linux skills with these free 4A0-D01 sample questions, all with answers and explanations. BGP and interface setup, network instances and Zero Touch Provisioning are all included. Use them to see which parts of fabric work you need to review.

Try them in the simulator Same questions, with study, timed and flashcard modes.

Showing 10 of 20 free sample questions.

Question 1Choose one

Which of the following best describes the primary reason for using eBGP instead of an IGP (like OSPF or IS-IS) for the underlay routing protocol in large-scale data center fabrics?

Question 2Choose one

An engineer needs to add a descriptive comment to an interface configuration in SR Linux to document its purpose. Where in the CLI hierarchy for that interface should the `description` be configured?

Question 3Choose one

The SR Linux architecture is described as 'model-driven'. What does this primarily imply about its configuration and operational state?

Question 4Choose one

A network administrator is configuring a static route on an SR Linux device and wants to ensure it is only installed in the routing table if the next-hop is reachable. Which feature should be used in conjunction with the static route configuration?

Question 5Choose 2

What are two primary functions of the Application Manager in the Nokia SR Linux operating system? (Select TWO).

Question 6Choose one

**Case Study:** A managed service provider (MSP) is deploying a multi-tenant data center fabric using Nokia SR Linux. They plan to use IP-VRFs to provide Layer 3 isolation for each customer. Customer-A requires a default route to be injected into their VRF to provide internet access via a shared firewall. The firewall is located in a separate 'shared-services' VRF. The network architect has configured the 'customer-a' VRF and the 'shared-services' VRF. They have also configured BGP route-target import/export policies to leak specific routes between the two VRFs. However, they need to generate a default route specifically within the 'customer-a' VRF that points to the leaked firewall address. What is the most appropriate method to accomplish this on the SR Linux border leaf?

Question 7Choose one

A network engineer is troubleshooting BGP peering between a leaf and a spine switch. The command `show network-instance default protocols bgp summary` is executed. What information is provided by this command?

Question 8Choose one

For monitoring purposes, an administrator needs to capture all BGP-related events, such as neighbor state changes, on an SR Linux switch. Where should the administrator configure the system to send these event notifications?

Question 9Choose one

True or False: In SR Linux, committing a configuration change in the CLI immediately saves it to the startup configuration file, ensuring it persists after a reboot.

Question 10Choose one

A network engineer is reviewing application performance in a leaf-spine fabric. They suspect that the oversubscription ratio between the leaf and spine switches is causing packet drops for a high-bandwidth, east-west traffic application. What does an oversubscription ratio of 3:1 on a leaf switch signify? flowchart LR subgraph Servers S1[Server 1 - 10G] S2[Server 2 - 10G] S3[Server 3 - 10G] S4[Server 4 - 10G] S5[Server 5 - 10G] S6[Server 6 - 10G] end subgraph LeafSwitch direction TB Downlinks[6 x 10G Downlinks] Uplinks[2 x 10G Uplinks] end Spine[Spine Switches] S1 & S2 & S3 & S4 & S5 & S6 --> Downlinks Uplinks --> Spine

10 more free samples are waiting

Create a free account to unlock the whole 4A0-D01 sample bank, or get full access to all 164 practice questions in the simulator.

Create account