Free JN0-683 sample questions
Try a set of free JN0-683 sample questions, each with the answer and an explanation. They cover IP fabric design, EVPN signaling and links between data centers. Go back over any area where the explanation surprises you.
Try them in the simulator Same questions, with study, timed and flashcard modes.
Showing 10 of 20 free sample questions.
You are tasked with monitoring the health of a large-scale IP fabric. You need to collect high-frequency data for interface counters and per-queue statistics without impacting the CPU of the QFX switches. Which telemetry protocol and transport mechanism should you use?
In an Edge-Routed Bridging (ERB) EVPN-VXLAN fabric, multiple leaf switches are configured with the same IP and MAC address on their IRB interfaces for a given VLAN. What is this feature called and what is its primary benefit?
True or False: In a 5-stage Clos (super-spine) IP fabric, direct physical connections exist between leaf switches in different pods.
**Case Study** A retail company, "Global Mart," operates an e-commerce platform hosted in a primary data center. To improve security and segment traffic, they have implemented a service chaining solution using Filter-Based Forwarding (FBF). All traffic from the Web VRF destined for the Database VRF must be redirected through a virtual firewall service instance running on a pair of SRX devices. The network topology involves leaf switches connected to the SRX firewalls. The leaf switches use FBF to steer traffic. The configuration appears correct, but during a security audit, it is discovered that if the primary SRX firewall fails, traffic is not automatically redirected to the standby SRX. Instead, traffic between the Web and Database VRFs is black-holed. Which two actions are required to provide automatic failover for the firewall service chain? (Select TWO)
A data center fabric is designed with an oversubscription ratio of 3:1 at the leaf layer. Each leaf has 48 x 10 Gbps server-facing ports and 6 x 40 Gbps uplink ports to the spine layer. What does this 3:1 ratio signify?
What is the primary difference between a Centrally-Routed Bridging (CRB) and an Edge-Routed Bridging (ERB) architecture in an EVPN-VXLAN fabric?
When extending Layer 2 domains between two data centers using EVPN-VXLAN, which EVPN route type is primarily responsible for advertising the MAC addresses of hosts from one data center to the other?
You are examining the BGP EVPN table on a leaf switch and see a Type 2 route. Which two pieces of information are contained within this route type? (Select TWO)
**Case Study** A company has two data centers, DC1 and DC2, interconnected with a Layer 3 DCI using EVPN Type 5 routes. Each data center has its own EVPN-VXLAN fabric. A specific tenant, 'Tenant-Blue', exists in both data centers. VMs within Tenant-Blue in DC1 can communicate with each other, and VMs within Tenant-Blue in DC2 can also communicate. However, communication fails for any VM trying to cross from DC1 to DC2. An administrator on the DC1 gateway verifies that it has an EBGP session with the DC2 gateway and is receiving Type 5 routes from DC2. However, these routes are not being installed into the Tenant-Blue VRF routing table. The configuration on the DC1 gateway for the Tenant-Blue VRF is as follows: ``` routing-instances { Tenant-Blue { instance-type vrf; route-distinguisher 1.1.1.1:100; vrf-target export target:65001:100; ... } } ``` What is the most likely configuration error preventing inter-DC communication for Tenant-Blue? graph LR subgraph DC1 VM1(VM1 in Tenant-Blue) -- DCI_GW1(DCI GW1) end subgraph DC2 VM2(VM2 in Tenant-Blue) -- DCI_GW2(DCI GW2) end DCI_GW1 -- "EBGP Peering (Type 5 Routes)" -- DCI_GW2 DCI_GW2 --x "Routes NOT imported to VRF" DCI_GW1
10 more free samples are waiting
Create a free account to unlock the whole JN0-683 sample bank, or get full access to all 230 practice questions in the simulator.