Free H12-831 sample questions
Here are free H12-831 sample questions on advanced routing and switching, with answers and explanations. They cover IPv6 transition, MPLS L3VPN and BGP route control. Use them to check your depth before the HCIE-Datacom track.
Try them in the simulator Same questions, with study, timed and flashcard modes.
Showing 10 of 20 free sample questions.
An e-commerce company, ShopFast, is expanding its data center fabric. The current architecture uses traditional VLANs for tenant segmentation, but they are approaching the 4094 VLAN limit and require a more scalable solution. The new design must support over 100,000 isolated tenant networks and extend Layer 2 segments across Layer 3 boundaries between different pods in the data center. The network team has decided to implement an overlay network technology. The underlying physical network (the underlay) is a robust Layer 3 fabric running OSPF. The team needs to choose an overlay protocol that can meet the scalability requirements and encapsulate Layer 2 frames within UDP packets for transport across the Layer 3 underlay. Which technology is the most appropriate solution for ShopFast's new data center fabric?
A router running MP-BGP for MPLS L3VPN services has received multiple paths for the same VPNv4 prefix. Assuming all other attributes like Local Preference, AS_PATH length, and Origin type are identical, and both paths are IBGP-learned, which factor will BGP use next to determine the best path?
Which of the following statements accurately describe characteristics of OSPFv3 compared to OSPFv2? (Select TWO)
A network administrator needs to monitor traffic volume from specific high-traffic servers to aid in capacity planning. The administrator wants to configure the switch to sample packets and send traffic flow statistics to a central collector. Which Huawei feature should be configured on the switch interfaces connected to the servers?
What is the primary function of the `ipv6 address auto link-local` command when configured on a router interface in a Huawei VRP system?
A network engineer is configuring an Eth-Trunk link between two switches. To ensure high availability, the engineer wants the link to remain active even if some, but not all, of the member links fail. Which Eth-Trunk parameter should be configured to define the minimum number of active links required for the Eth-Trunk interface to stay up?
A university campus network spans multiple buildings and uses IS-IS as its IGP. To optimize routing, the network is divided into a Level-2 backbone area and several Level-1 areas, one for each building. A router R5 is located in a Level-1 area and needs to send traffic to a server in a different Level-1 area. How does R5 learn the path to the destination server?
A service provider offers MPLS L3VPN services to two different customers, Customer A and Customer B. Both customers coincidentally use the same private IP address space, 192.168.1.0/24, in their respective networks. How does the provider's BGP process on the PE routers keep the routes for 192.168.1.0/24 from Customer A distinct from the routes for 192.168.1.0/24 from Customer B?
A network engineer is troubleshooting a BGP peering issue. The output of `display bgp peer` shows the peer state as 'Connect'. What does this state indicate about the peering process? sequenceDiagram participant R1 participant R2 R1->>R2: TCP SYN Note over R1,R2: R1 is in 'Connect' state R2-->>R1: TCP SYN-ACK R1->>R2: TCP ACK Note over R1,R2: TCP session established R1->>R2: BGP OPEN Message
10 more free samples are waiting
Create a free account to unlock the whole H12-831 sample bank, or get full access to all 231 practice questions in the simulator.