Free CDCP-001 sample questions
Work through these free CDCP-001 sample questions, each with the right answer and an explanation. Topics include cooling physics, cable management and fire detection standards. Use them to check your grasp of data center facilities before the full practice test.
Try them in the simulator Same questions, with study, timed and flashcard modes.
Showing 10 of 20 free sample questions.
A technician is installing OM4 multi-mode fiber optic cable. What is the standard color for the outer jacket of this type of cable?
Which of the following describes the heat transfer mechanism where heat is moved through the circulation of a fluid, such as air or water?
A data center operator notices that CRAC units are frequently turning on and off in short bursts. This 'short cycling' is causing premature wear on the compressors. What is the most likely cause of this issue?
Which type of fire detection system is best suited for providing very early warning of a fire, often detecting invisible products of combustion long before smoke is visible?
A hospital is building a new data center to house critical patient records and life-support system monitoring. The board has mandated that there be no single points of failure in any part of the infrastructure and that the facility must be concurrently maintainable. Which Uptime Institute Tier level does this requirement describe?
In a data center using a Top-of-Rack (ToR) cabling architecture, where are the access switches typically located?
True or False: Zinc whiskers, microscopic conductive filaments that can grow from electroplated steel surfaces, pose a significant threat in data centers primarily because they can cause short circuits if they break off and land on electronic components.
A data center has a total IT heat load of 150 kW. To select an appropriate CRAC unit, the cooling capacity needs to be converted to tons of refrigeration. Approximately how many tons of refrigeration are required to cool this load? (1 ton of refrigeration = 12,000 BTU/hr; 1 kW = 3,412 BTU/hr)
A data center uses an End-of-Row (EoR) cabling architecture. A diagram of the layout is shown below. What is a primary disadvantage of this design compared to a Top-of-Rack (ToR) design? graph TD subgraph Row 1 Rack1_1[Server Rack 1] Rack1_2[Server Rack 2] Rack1_3[...] Rack1_4[Server Rack N] end subgraph EoR Cabinet EoR_Switch[EoR Switch] end Rack1_1 -->|Long Copper Cable| EoR_Switch Rack1_2 -->|Long Copper Cable| EoR_Switch Rack1_4 -->|Long Copper Cable| EoR_Switch
10 more free samples are waiting
Create a free account to unlock the whole CDCP-001 sample bank, or get full access to all 229 practice questions in the simulator.