Free NSE6-FSW-7-2 sample questions
Every free NSE6-FSW-7-2 sample question here includes an answer and an explanation. They cover FortiLink management, topology planning, VLANs and sFlow monitoring. Use them to refresh FortiSwitch skills before you move to the 7.6 exam.
Try them in the simulator Same questions, with study, timed and flashcard modes.
Showing 10 of 20 free sample questions.
A network engineer is designing a highly available campus core using a FortiGate HA Active-Passive cluster and a pair of FortiSwitches configured in an MCLAG. The FortiGate cluster connects to each FortiSwitch in the MCLAG pair via a FortiLink interface. The primary design goal is to ensure seamless failover and load balancing of traffic from the access layer to the FortiGate cluster. Which configuration approach correctly establishes the FortiLink between the FortiGate HA cluster and the FortiSwitch MCLAG pair? graph TD subgraph FortiGate HA Cluster FG1(FortiGate 1 - Active) FG2(FortiGate 2 - Passive) FG1 ---|HA Heartbeat| FG2 end subgraph FortiSwitch MCLAG Pair FSW1(FortiSwitch 1) FSW2(FortiSwitch 2) FSW1 |ICL| FSW2 end FG1 -- FortiLink Port A --> FSW1 FG1 -- FortiLink Port B --> FSW2 FG2 -- FortiLink Port C --> FSW1 FG2 -- FortiLink Port D --> FSW2 AccessLayer[Access Layer Switches] --> FSW1 AccessLayer --> FSW2
A network operations center (NOC) is investigating reports of poor application performance for users connected to a specific FortiSwitch access switch. The team suspects microbursts of traffic are causing packet loss, but standard SNMP polling of interface counters is not granular enough to confirm this theory. They need to collect detailed traffic flow data, including source/destination IPs, ports, and protocols, without adding significant processing overhead to the switch's CPU. Which monitoring feature is most suitable for this requirement?
True or False: A FortiSwitch operating in standalone mode can be fully integrated into the Fortinet Security Fabric, allowing it to share telemetry and participate in automated threat responses orchestrated by a FortiGate.
A Managed Service Provider (MSP) is deploying a multi-tenant network using a single FortiGate in VDOM mode. Each tenant requires a dedicated, managed FortiSwitch stack. The MSP's goal is to maintain strict administrative and traffic isolation between tenants while using a shared FortiLink connection from the FortiGate to a central distribution FortiSwitch. **Current Setup:** - A FortiGate 1800F is configured with two VDOMs: TenantA_VDOM and TenantB_VDOM. - A central distribution FortiSwitch DS-1 connects to the FortiGate's FortiLink aggregate interface. - Tenant A has a FortiSwitch stack (TS-A) connected to DS-1. - Tenant B has a FortiSwitch stack (TS-B) connected to DS-1. **Requirements:** 1. The TenantA_VDOM must manage only the TS-A stack. 2. The TenantB_VDOM must manage only the TS-B stack. 3. Traffic from Tenant A must be completely isolated from Tenant B at Layer 2 on the distribution switch. 4. The solution must be scalable for adding more tenants. Which configuration approach meets all the MSP's requirements? graph TD subgraph FortiGate VDOM_A[TenantA_VDOM] VDOM_B[TenantB_VDOM] end FortiGate -- FortiLink LACP --- DS1(Distribution Switch DS-1) DS1 -- Trunk --- TSA(Tenant A Stack) DS1 -- Trunk --- TSB(Tenant B Stack)
A retail company has a small branch office with a FortiSwitch 108F but no on-site FortiGate. The corporate IT team needs to manage the switch configuration, monitor its status, and apply security policies remotely. They want a cloud-based solution that does not require a VPN tunnel back to a central FortiGate. Which management operation mode should be used for the FortiSwitch?
A network administrator is securing the access layer of a campus network. To prevent network loops and instability caused by users accidentally connecting switches or hubs to wall jacks, which TWO Spanning Tree Protocol (STP) protection features should be enabled on all user-facing, edge ports? (Select TWO.)
An organization is deploying FortiSwitches to support a mixed environment of VoIP phones, IP security cameras, and corporate workstations. The goal is to use a single configuration policy that automatically places devices into their correct VLANs and applies appropriate QoS settings. Which FortiSwitch feature is designed for this purpose?
A FortiSwitch stack, managed by a FortiGate, has suddenly gone offline in the FortiGate GUI. The physical links are up, and there are no logs indicating a failure on either device. An administrator needs to perform initial CLI troubleshooting from the FortiGate to check the status of the FortiLink discovery process. Which command provides the most direct information about the LLDP-based discovery of connected FortiSwitches?
A data center requires connecting a high-density server with a 40GbE QSFP+ port to four separate 10GbE SFP+ ports on a FortiSwitch 448E. What must be configured on the FortiSwitch to enable this connectivity?
10 more free samples are waiting
Create a free account to unlock the whole NSE6-FSW-7-2 sample bank, or get full access to all 187 practice questions in the simulator.