ExamDumpster

Free FCSS-EFW-AD-7-4 sample questions

These free FCSS-EFW-AD-7-4 sample questions each show the right answer with an explanation. They use the retired 7.4 objectives, such as BGP routing, central management and ADVPN. Use them to review enterprise FortiGate design before you choose a current exam.

Try them in the simulator Same questions, with study, timed and flashcard modes.

Showing 10 of 20 free sample questions.

Question 1Choose one

What is the primary function of metadata variables within FortiManager provisioning templates?

Question 2Choose one

A network engineer is troubleshooting a new IPsec tunnel where IKEv2 is used. The `diagnose vpn ike log filter` is configured, and the debug output shows that the remote peer is not responding to the IKE_SA_INIT message sent by the local FortiGate. The engineer has verified that the public IP address of the remote peer is correct. What is the most common cause of this issue?

Question 3Choose one

An administrator needs to implement a Security Fabric between a root FortiGate in a data center and three downstream FortiGate devices in branch offices. What is a prerequisite for a downstream FortiGate to join the Security Fabric?

Question 4Choose one

A company has a guest wireless network policy that uses a captive portal for authentication. The security team wants to apply web filtering to this traffic but is concerned about performance, as the FortiGate model in use has a low-end CPU. Which web filtering inspection mode should be used to provide URL filtering with the least impact on CPU resources?

Question 5Choose one

After a recent configuration change on FortiManager, an administrator notices that all managed FortiGate devices have gone into a 'modified' state. The administrator did not intentionally make any changes to the device-level settings. What is the most likely cause of this status change?

Question 6Choose one

A global logistics company, GlobaLink, is deploying a large-scale SD-WAN and ADVPN solution managed by FortiManager. The goal is to provide resilient connectivity for over 300 branch offices to two main data centers (DC1 and DC2). **Company Background:** GlobaLink operates on a global scale with critical applications hosted in DC1 and DC2. Branch offices rely on dual-WAN links (MPLS and Broadband) for connectivity. The company wants to leverage SD-WAN to optimize application performance and reduce MPLS costs, while using ADVPN for efficient branch-to-branch communication without hair-pinning traffic through the data centers. **Current Situation & Requirements:** The network team has configured FortiManager with a single ADOM for all 300+ devices. They are using provisioning templates with metadata variables to handle unique branch settings. The design calls for two ADVPN hubs, one in each data center, for redundancy. All branches (spokes) must be able to build dynamic tunnels to each other and fail over between the hubs if one becomes unreachable. The primary requirement is to ensure the ADVPN shortcut traffic (branch-to-branch) is correctly routed and does not interfere with the SD-WAN's primary path selection for DC-bound traffic. **Problem:** After deployment, administrators notice that branch-to-branch traffic is intermittently being sent to the data center hubs instead of directly between spokes. This increases latency and consumes unnecessary bandwidth at the data centers. The SD-WAN rules are correctly steering application traffic to the data centers over the best available link. The issue appears to be with how ADVPN shortcut traffic is handled. Which configuration is essential to ensure ADVPN shortcut traffic is prioritized for the dynamic spoke-to-spoke tunnels and does not get routed through the hub? graph TD subgraph Data Center 1 Hub1[ADVPN Hub 1] end subgraph Data Center 2 Hub2[ADVPN Hub 2] end Spoke1[Branch 1] -- Overlay --> Hub1 Spoke1 -- Overlay --> Hub2 Spoke2[Branch 2] -- Overlay --> Hub1 Spoke2 -- Overlay --> Hub2 SpokeN[Branch N] -- Overlay --> Hub1 SpokeN -- Overlay --> Hub2 Spoke1 |ADVPN Shortcut (Issue)| Spoke2 Spoke1 -->|Hair-pinning| Hub1 --> Spoke2 style Spoke1 fill:#f9f,stroke:#333,stroke-width:2px style Spoke2 fill:#f9f,stroke:#333,stroke-width:2px style SpokeN fill:#f9f,stroke:#333,stroke-width:2px

Question 7Choose one

A system administrator is tasked with backing up the configuration of a standalone FortiGate device that is not managed by FortiManager. The administrator needs to ensure the backup file includes all settings, certificates, and firmware. Which backup method should be used?

Question 8Choose one

A retail chain, 'ShopSmart', is deploying FortiGate devices at 150 stores. The central IT team uses FortiManager for zero-touch provisioning (ZTP). The process involves a store employee plugging in the FortiGate, which then connects to FortiDeploy to get the FortiManager's IP address. **Deployment Plan:** The core of the ZTP process relies on FortiDeploy, a cloud-based service, to direct the new FortiGates to the on-premise FortiManager. Once connected to FortiManager, a provisioning template is applied, which configures basic networking, security policies, and an IPsec tunnel back to the corporate headquarters. **Current Situation & Problem:** A new batch of 20 FortiGates is being deployed. One specific store reports that its new FortiGate is online and has internet access, but it never appears in the FortiManager's 'Model Devices' list for authorization. The IT team has confirmed the device's serial number was correctly added to the FortiDeploy portal. They have also verified that other devices from the same batch have connected successfully. The local store employee confirms the device is powered on and connected to the internet modem. **Troubleshooting Goal:** What is the most probable reason for this specific FortiGate failing to register with FortiManager, despite having internet access and being correctly listed in FortiDeploy? sequenceDiagram participant FG as New FortiGate participant ISP participant FD as FortiDeploy participant FM as FortiManager FG->>ISP: DHCP Request ISP-->>FG: IP Address & DNS FG->>FD: Registration (Serial Number) FD-->>FG: FortiManager IP & Key FG->>FM: Authorization Request Note right of FM: This step is failing!

Question 9Choose one

A FortiGate is configured to use the FortiGuard Botnet C&C database for DNS lookups. An internal client attempts to resolve a domain name that is listed in this database. What action will the FortiGate take?

Question 10Choose one

When troubleshooting a high CPU issue on a FortiGate, the output of the `get system performance status` command shows that the `ipsengine` process is consuming 80% of the CPU resources. What is the most effective next step to diagnose the cause of the high CPU utilization by the IPS engine?

10 more free samples are waiting

Create a free account to unlock the whole FCSS-EFW-AD-7-4 sample bank, or get full access to all 682 practice questions in the simulator.

Create account