ExamDumpster

Free D-MSS-DS-23 sample questions

Test yourself with these free D-MSS-DS-23 sample questions; every answer comes with an explanation. Drive and back-end best practices, site evaluation, and sizing with Midrange Sizer and PowerSizer all come up. Work through them to check your design judgment.

Try them in the simulator Same questions, with study, timed and flashcard modes.

Showing 10 of 20 free sample questions.

Question 1Choose one

What is the primary role of the VASA (vSphere APIs for Storage Awareness) provider when implementing vSphere Virtual Volumes (vVols) with a Dell PowerStore array?

Question 2Choose one

True or False: In a Dell Unity XT hybrid array, FAST VP (Fully Automated Storage Tiering for Virtual Pools) automatically migrates data at a LUN or file system level between different drive tiers.

Question 3Choose one

**Case Study:** A retail company is deploying a new Dell Unity XT 680F for their e-commerce platform's backend database. Performance analysis of the current system shows the workload is 80% read and 20% write, with a highly concentrated set of 'hot' data blocks (product catalog and active inventory) that accounts for approximately 500 GB of the total 10 TB database. The primary design goal is to achieve the lowest possible read latency for this hot data set. The proposed Unity XT 680F configuration consists of a dynamic pool built with 20 x 1.92 TB SAS SSD drives. The design team is debating the best way to optimize read performance further. They are considering adding either more SAS SSDs to the pool or a pair of dedicated drives for a specific feature. Which design modification would be the most effective and efficient way to meet the low-latency requirement for the 500 GB hot data set?

Question 4Choose 2

A solutions architect needs to design a Dell PowerStore solution that will host a new, mission-critical containerized application managed by Kubernetes. The application requires persistent storage that can be dynamically provisioned and managed through standard Kubernetes APIs (e.g., PersistentVolumeClaims). Which PowerStore feature is essential for this design? (Select TWO)

Question 5Choose one

When using the PowerSizer tool to design a PowerStore X solution, what key consideration must be accounted for that is not present when sizing a PowerStore T model?

Question 6Choose one

A system administrator is reviewing the backend SAS cabling for a newly installed Dell Unity XT array with one DAE. The goal is to ensure maximum redundancy. How should the SAS ports on the Storage Processors (SPs) be cabled to the DAE? sequenceDiagram participant SPA participant SPB participant DAE SPA->>DAE: SAS Port 0 to LCC A Port 0 SPA->>DAE: SAS Port 1 to LCC B Port 0 SPB->>DAE: SAS Port 0 to LCC B Port 1 SPB->>DAE: SAS Port 1 to LCC A Port 1

Question 7Choose one

During the workload characterization phase for a new storage design, a consultant uses an analysis tool and records the following metrics for the primary application: average IOPS of 15,000, a read/write ratio of 3:1, and an average I/O size of 32 KB. What is the approximate throughput requirement for this workload in MB/s?

Question 8Choose one

A customer is implementing a Dell PowerStore array and wants to ensure that if a single drive fails, the system can rebuild the data from that drive without impacting the overall RAID protection level of the storage pool during the rebuild process. Which feature of PowerStore's dynamic resiliency enables this?

Question 9Choose one

When designing a Dell Unity XT storage pool for a general-purpose virtualized environment, which RAID level typically offers the best balance of performance, capacity utilization, and protection for all-flash configurations?

Question 10Choose one

**Case Study:** A university is planning to deploy a new Dell PowerStore 3000X to support a research project that requires running data analytics applications directly on the storage array to minimize data movement. The research team will use a mix of containerized applications and traditional virtual machines. They have projected a need for 10 vCPUs and 64 GB of RAM for their applications running within AppsON. The solutions architect is using the PowerSizer tool to validate the configuration. The tool indicates that a standard PowerStore 3000X appliance has a total of 32 vCPUs and 384 GB of RAM available per appliance (both nodes combined). The workload is expected to generate significant storage I/O. What is the most important design consideration for the architect when finalizing the PowerStore 3000X configuration to ensure both the research applications and the storage services perform adequately?

10 more free samples are waiting

Create a free account to unlock the whole D-MSS-DS-23 sample bank, or get full access to all 274 practice questions in the simulator.

Create account