ExamDumpster

Free D-PSC-MN-01 sample questions

Get ready for hands-on PowerScale work with these free D-PSC-MN-01 sample questions, which come with answers and explanations. Hardware layout, FRU replacement and cluster creation all come up. Check each procedure against the explanations before booking.

Try them in the simulator Same questions, with study, timed and flashcard modes.

Showing 10 of 20 free sample questions.

Question 1Choose one

True or False: After replacing a failed boot drive (CRU) in a PowerScale node, the node will automatically reimage itself from a healthy peer node in the cluster upon reboot without requiring any manual intervention from the serial console.

Question 2Choose 3

An administrator is creating a new network pool within an existing Groupnet to isolate traffic for a new workflow. Which of the following configuration parameters are mandatory to define a basic, functional network pool? (Select THREE)

Question 3Choose one

A technician is tasked with permanently decommissioning a PowerScale node from a production cluster. To ensure all data is evacuated from the node without causing data unavailability, the technician must initiate the SmartFail process. Which is the correct command to begin this process for node number 5?

Question 4Choose one

An engineer is unboxing and racking new PowerScale nodes at a customer site. According to Dell's standard installation procedures, what is a critical physical verification step that must be performed on the node's internal components after removing the top cover but before applying power for the first time?

Question 5Choose one

A systems administrator needs to replace a failed journal drive on a PowerScale node. To ensure data integrity, the node's journal must be moved to another available drive before the failed drive can be physically replaced. The command to perform this action is `isi_____`.

Question 6Choose one

**Company Background:** Global Media Inc. (GMI) operates a large PowerScale environment for its video-on-demand platform. Their primary cluster consists of 20 F-series All-Flash nodes for high-performance transcoding and a separate 30-node A-series Archive cluster for long-term media preservation. Both clusters are approaching 85% capacity utilization. **Current Situation:** GMI has acquired a new content library and must add significant capacity and performance for a new 4K streaming service. The new workload requires a balance of high-capacity storage for large video files and high-throughput performance to serve multiple concurrent streams, but it does not require the extreme low latency of the all-flash transcoding tier. The existing data center has rack space and power, but the network team has mandated that any new nodes must connect to a new 100GbE network fabric, whereas the existing clusters use 40GbE. **Requirements:** 1. Add at least 5 Petabytes of usable capacity. 2. Provide high sequential read throughput for streaming. 3. Integrate the new nodes into the existing PowerScale management domain. 4. Connect the new nodes to the new 100GbE network fabric. 5. The solution must be cost-effective, avoiding the expense of all-flash for this specific workload. Which solution best meets all of GMI's requirements?

Question 7Choose one

A PowerScale cluster is designed with a physically separate and redundant backend network. What is the primary purpose of this dedicated backend network? graph TD subgraph "Client-Facing Network (Frontend)" direction LR FSW1[Frontend Switch 1] FSW2[Frontend Switch 2] end subgraph "PowerScale Cluster" direction TB Node1 -- Frontend Port 1 --> FSW1 Node1 -- Frontend Port 2 --> FSW2 Node2 -- Frontend Port 1 --> FSW1 Node2 -- Frontend Port 2 --> FSW2 Node3 -- Frontend Port 1 --> FSW1 Node3 -- Frontend Port 2 --> FSW2 Node1 -- Backend Port 1 --> BSW1 Node1 -- Backend Port 2 --> BSW2 Node2 -- Backend Port 1 --> BSW1 Node2 -- Backend Port 2 --> BSW2 Node3 -- Backend Port 1 --> BSW1 Node3 -- Backend Port 2 --> BSW2 end subgraph "Internal Network (Backend)" direction LR BSW1[Backend Switch 1] BSW2[Backend Switch 2] end Clients((Clients)) --> FSW1 Clients((Clients)) --> FSW2

Question 8Choose one

A new PowerScale node has been physically racked and cabled. An engineer connects to the serial console to perform the initial configuration. The cluster setup wizard prompts for the type of cluster to create or join. Which of the following is NOT a valid cluster creation option presented during this initial setup process?

Question 9Choose one

A technician is dispatched to a remote data center to replace a failed M.2 boot drive in a PowerScale F600 node, which is a Customer Replaceable Unit (CRU). After physically swapping the drive, the technician boots the node. The node fails to join the cluster, and the front panel LCD displays a 'Configuration Mismatch' error. What is the most likely cause of this issue and the required next step?

Question 10Choose one

An engineer is attempting to add a used PowerScale H500 node, previously part of a decommissioned lab cluster, into a new production cluster running a different version of OneFS. The standard 'Join an existing cluster' process fails repeatedly. The engineer has confirmed full network connectivity between the new node and the production cluster's backend network. Which procedure is required to successfully integrate this node?

10 more free samples are waiting

Create a free account to unlock the whole D-PSC-MN-01 sample bank, or get full access to all 216 practice questions in the simulator.

Create account