ExamDumpster

Free HPE4-A52 sample questions

Prepare for the lab with these free HPE4-A52 sample questions, which come with answers and explanations. They cover VSX, OSPF, NAC and QoS. Work through them, then repeat the hard topics in your own lab.

Try them in the simulator Same questions, with study, timed and flashcard modes.

Showing 6 of 12 free sample questions.

Question 1Choose one

A network architect is designing a VSF stack for an access closet using Aruba CX 6300 switches. The design requires high availability. Which topology recommendation ensures the highest resilience against a single link or switch failure within the VSF stack?

Question 2Choose 2

Which TWO statements accurately describe the behavior of the 'active-gateway' feature in an AOS-CX VSX environment? (Select TWO)

Question 3Choose one

A network engineer is configuring OSPF on a campus core consisting of two Aruba CX 8360 switches. The core switches connect to several distribution blocks. To minimize the size of the routing table in the distribution blocks (which are in OSPF Area 1), the engineer wants to inject only a default route and block all other summary LSAs. Which area type should be configured for Area 1?

Question 4Choose one

In an EVPN-VXLAN campus fabric, you are troubleshooting a connectivity issue where a client in VLAN 10 on Edge Switch A cannot communicate with a client in VLAN 20 on Edge Switch B. The fabric uses a centralized L3 gateway on the Core. You verify that MAC addresses are learned in the local L2 tables. Which specific BGP EVPN route type is responsible for advertising the IP prefix reachability between VTEPs to allow inter-subnet routing?

Question 5Choose one

A customer is deploying User-Based Tunneling (UBT) 2.0. They want to ensure that specific wired clients connected to the AOS-CX access switches are tunneled to the Aruba Gateway cluster in the DMZ. Which of the following components is MANDATORY to assign the 'secondary role' that triggers the tunnel on the switch?

Question 6Choose one

You are verifying the OSPF configuration on a VSX pair. The 'show ip ospf' command on the secondary member shows that it is in a 'Waiting' state for DR election on VLAN 10. The primary member is the DR. You notice that 'active-active' routing is enabled. Why is the secondary member in a Waiting/Passive-like state for OSPF adjacency establishment on this SVI?

6 more free samples are waiting

Create a free account to unlock the whole HPE4-A52 sample bank, or get full access to all 150 practice questions in the simulator.

Create account