ExamDumpster

Free HPE4-A51 sample questions

Check your skills with these free HPE4-A51 sample questions, each with the answer and an explanation. Questions touch SSID deployment, zero touch onboarding and UBT. Use them alongside lab practice in Central.

Try them in the simulator Same questions, with study, timed and flashcard modes.

Showing 6 of 12 free sample questions.

Question 1Choose one

You are auditing a customer's device inventory in HPE Aruba Networking Central. You notice several switches have a 'Sync Status' of 'Not Synced'. Upon investigation, you find that local changes were made via CLI. Which action in Central enforces the group configuration and overwrites the local changes?

Question 2Choose 2

A new branch office requires 20 APs to be provisioned. The local firewall blocks all outbound traffic by default. To enable Zero Touch Provisioning (ZTP) for these APs to reach HPE Aruba Networking Central, which specific outbound ports must be opened on the firewall? (Select TWO)

Question 3Choose one

You are configuring a VSX pair of AOS-CX switches for a campus aggregation layer. You have configured the Inter-Switch Link (ISL) and the Keepalive link. During a failure test, you disconnect the ISL. You observe that the secondary switch shuts down its SVI interfaces and downstream VSX LAG members. What is the technical reason for this behavior?

Question 4Choose one

You are validating an MC-LAG configuration on a pair of AOS-CX switches connecting to a server. The server administrator reports intermittent connectivity. You check the LACP status on the switch and see the following: ``` Aggregator: lag1 Partner System ID: 00:00:00:00:00:00 Partner Oper Key: 0 ``` What does this output indicate?

Question 5Choose one

A university has a requirement to support 'Colorless Ports' for their campus APs. Any AP plugged into any access port should automatically be assigned to the Management VLAN and have the correct PoE priority. Which AOS-CX feature best satisfies this requirement?

Question 6Choose one

You are configuring the OSPF underlay for a campus network that will support APs tunneling traffic to a Gateway Cluster. What is the recommended OSPF configuration for the Loopback interfaces on the switches to ensure stable reachability for the AP tunnels?

6 more free samples are waiting

Create a free account to unlock the whole HPE4-A51 sample bank, or get full access to all 150 practice questions in the simulator.

Create account