Free RPFT sample questions
Below are free RPFT sample questions with answers and explanations. The set includes spirometry and other test procedures, equipment calibration and checking results. Use the explanations to learn how to judge whether a test result is acceptable.
Try them in the simulator Same questions, with study, timed and flashcard modes.
Showing 10 of 20 free sample questions.
When performing a nitrogen washout test for FRC, the test is typically continued until the end-tidal nitrogen concentration is less than ____.
A pediatric patient with cystic fibrosis performs three FVC maneuvers. The two best FVC values are 1.50 L and 1.62 L. The two best FEV1 values are 1.00 L and 1.10 L. Do these maneuvers meet ATS/ERS repeatability criteria for children?
A patient with a tracheostomy tube is scheduled for spirometry. Which of the following is the most important consideration for adapting the equipment?
Which of the following conditions would lead to an underestimation of TLC when measured by helium dilution but a more accurate measurement when using body plethysmography?
Which three of the following are considered absolute contraindications for performing a methacholine challenge test? (Select THREE)
True or False: When performing biological quality control on a spirometer, the results from the technician must fall within +/- 3% of their established mean FEV1 and FVC values.
A patient performs an FVC maneuver, and the flow-volume loop shows a 'saw-tooth' pattern on both the inspiratory and expiratory limbs. This finding is most suggestive of:
A technologist is setting up a gas analyzer to measure CO concentration for a DLCO test. The calibration procedure requires a gas with a known concentration of 0.3% CO, 21% O2, and a balance of N2. Which type of gas analyzer is most commonly used for this purpose? pie title="Gases in DLCO Test Mixture" "Carbon Monoxide": 0.3 "Tracer Gas (e.g., CH4)": 0.3 "Oxygen": 21 "Nitrogen (Balance)": 78.4
A patient with kyphoscoliosis is unable to stand upright for a height measurement. Which of the following is the most appropriate alternative method for estimating height to select reference values?
10 more free samples are waiting
Create a free account to unlock the whole RPFT sample bank, or get full access to all 215 practice questions in the simulator.